[最新]Cakewalk by BandLab 2021.1(Win/Mac)

安装方法:

官网下载Bandlab Assistant(点击)软件,注册帐号即可免费使用Cakewalk,每次升级只要打开这个软件就行。 本站链接里也提供有安装包,方便下载。

如果用Bandlab Assistant助手下载慢或者不能下载,请选择这种方法,Cakewalk_by_BandLab下载完成后会默认保存在C盘某文件夹下,我把安装文件和升级文件打包上传网盘,朋友们可以下载,但必须要注册,不然会是演示版!举例说明:

一.安装 bandlab-assistant-windows-latest(网站注册)

二.安装主程序Cakewalk_by_BandLab_Setup_26.01.0.28 和其他几个安装文件,melodyne也可安装本站提供的最新版本

三.安装升级文件Cakewalk_by_BandLab_Update_Setup_26.04.0.179

四.安装完毕后,启动bandlab-assistant,注册成功!

说明:为不方便下载的朋友,我们特意提供有百度网盘链接,具体安装参考: 
2020.04

Release Note (2021.1)
Features & Enhancements

  • Arranger section inclusion of outlying MIDI notes. When dragging sections or committing arrangements, Cakewalk has logic for dealing with leading/trailing MIDI notes that overlap section boundaries.
  • Absolute time in Arranger tracks. The time base format for each Arranger track can be set to either Musical or Absolute. The time base format determines what happens to sections when you change the project tempo.
  • Cakewalk supports SSO (Single Sign-On) for activation, which allows you to log in via any service supported by BandLab as your sign-in authority. Google, Facebook, Apple ID, mobile phone and BandLab user/password credentials are currently supported.

Enhancements

  • Cancel VST scan. You can now cancel an in-progress VST scan with the new ‘Cancel Scan’ button in Edit > Preferences > File – VST Settings or via the Cancel option in the VST Scan toast notification.
  • Auto termination of VST scan. Shutting down Cakewalk will now automatically terminate any scan in progress.
  • The new ‘Zoom to Fit Project Horizontally’ shortcut (CTRL+ALT+F) zooms to fit the entire project in the Clips pane, without affecting the height of tracks.
  • Improved selection with Arranger sections. If there are gaps between a range of selected sections, the unselected clips remain unselected. You can now also unselect fully selected clips from a selection and they will not be moved with the section.
  • Cutting an Arranger section with Ripple Edit enabled now deletes the hole to make it consistent with the Delete command.
  • Clicking on an articulation (without modifiers), or changing an articulation’s type or MIDI channel now sends any triggered MIDI events associated with the articulation.
  • Four new buttons have been added to the Control Bar’s Select module in Large mode: ‘Select Track Envelopes with Clips’, ‘Select Track Articulations with Clips’, ‘Select Events with Sections’, and ‘Select Sections with Time Ruler’.
  • Moving clips between Takes lanes on the same track now respects the Auto Crossfade setting.
  • Insert Instrument track behavior. When selected from the track context menu, the Insert Instrument command now inserts the instrument before the current track rather than after the last track.
  • Phase and Interleave buttons are now available in the Track view and Inspector for Instrument tracks.
  • Option to only use external MIDI inputs. MIDI tracks now have a new ‘All External Inputs’ input option, which only appears when at least one soft synth with a MIDI output is present in the project. All External Inputs means any MIDI input that isn’t an output from a soft synth, such as hardware MIDI ports and virtual controllers.
  • Export to Standard MIDI File now respects the selection. If there is no selection, the whole project is exported.
  • The integrated LAME MP3 encoder has been updated to version 3.100. This includes bug fixes and stability improvements to MP3 encoding and also speeds up the encoding process. Additionally, Cakewalk has been updated to now handle discarding padding samples when importing MP3 files. i.e imported MP files will not contain extra data at the beginning of the file.
  • The libsndfile library used for import and export of various audio formats has been updated to version 1.0.30. This fixes numerous issues with handling BWF, Wave64, AIFF, FLAC and Ogg files.

Optimizations

  • Dynamic plug-in parameter optimizations and improvements in responsiveness and memory footprint when loading and editing projects with lots of tracks and high parameter count plug-ins.
  • Improved handling of ProChannel automation. ProChannel bypass automation is now UI independent and also buffer accurate. ProChannel bypass will also properly enable/disable with automation during fast bounce and freeze operations.

Bug Fixes

  • Crash when running onboarding more than once.
  • Crash when attempting to load new sample in Drum Replacer.
  • Hang on project load while VST scan is running.
  • Redo of crop then move of Articulation crashes.
  • Automation crash on project close.
  • Rare crash after modifying event in Piano Roll then pressing play.
  • Step Sequencer Clips intermittently fail to show notes.
  • Step Sequencer Beat Counter fails to repeat on Groove clip repetitions.
  • PRV does not display repetitions of Step Sequencer loops.
  • Track names show incorrectly in plug-ins after 2020.11 update.
  • Transport fails to roll with Realtime Bounce when freezing.
  • Cursor moves unexpected after cancel of Kind in Event List.
  • After deleting last event in Event List, selection should go to previous event.
  • Assignable parameters not created for FX Chains on project load.
  • Project Editing Time displays inconsistently in File Stats.
  • Rename clip doesn’t work on MIDI clips if articulations exist on the track.
  • Installer Text/Progress Bar for Silent Install is truncated.
  • Bus pane not updating correctly after using track manager to hide/show buses.
  • Clicking on a note within the Piano Roll view or swapping active tracks automatically opens the Articulation Map pane.
  • Ripple Edit Cut not shifting Arranger sections as expected.
  • Section/Arrangement titles missing in 2020.11.
  • Allow drag move/copy of multiple articulations.
  • Mouse cursor gets moved/stuck on articulation events in Event List.
  • Scaling PitchWheel events gives incorrect results.
  • Cannot bounce or freeze ProChannel Enable automation unless it is done in realtime.
  • Selection becomes stuck unexpectedly when selecting envelopes.
  • Bus envelopes from multiple buses not copied correctly in duplicate clips/arranger operations.
  • Toggling track interleave causes plug-in automation to lose sync.
  • ProChannel automation cannot be reassigned to plug-in automation in tracks.
  • Automation read/write not being acknowledged for newly created FX parameters.
  • Copying and pasting FX automation envelopes create orphaned envelopes until parameters pre-created.
  • FX Chain Input/Output Gain envelopes controlling incorrect parameter in FX Chain UI.
  • Synth Rack automation not shown when changing synth parameters.
  • Allow adding of additional per-output instrument tracks via Synth Rack context menu.
  • Add Track inconsistent Insert Track behavior.
  • Projects with multiple instances of plug-ins with high parameter counts become very sluggish trying to close/remove instances.
  • UseGlobalSnapForStaffView variable stops working after opening older project.
  • Imported .wav file has clicks from time stretch.
  • Drum Maps are saved unexpectedly with Track Templates.
  • VST Scan does not close with the app.
  • Control Surface Refresh value does not change as expected below 25ms.
  • Custom bank selection does not take effect in Event List view.
  • Insert/Append Instrument fails to place track in folder.


功能与增强

  • 编配器部分包括远处的MIDI音符。在拖动部分或提交安排时,Cakewalk具有处理与部分边界重叠的前导/后奏MIDI音符的逻辑。
  • 编曲曲目中的绝对时间。每个编配器曲目的时基格式都可以设置为“音乐”或“绝对”。时基格式决定了更改项目节奏时各节会发生什么。
  • Cakewalk支持SSO(单点登录)进行激活,这使您可以通过BandLab支持的任何服务作为登录授权进行登录。当前支持Google,Facebook,Apple ID,手机和BandLab用户/密码凭据。

增强功能

  • 取消VST扫描。现在,您可以使用“编辑”>“首选项”>“文件-VST设置”中的新“取消扫描”按钮,或通过“ VST扫描Toast”通知中的“取消”选项来取消正在进行的VST扫描。
  • 自动终止VST扫描。现在,关闭Cakewalk将自动终止正在进行的任何扫描。
  • 新的“水平缩放以适合项目”快捷键(CTRL + ALT + F)可以缩放以适合“剪辑”窗格中的整个项目,而不会影响轨道的高度。
  • 改进了编曲部分的选择。如果一系列选定部分之间存在间隙,则未选定的剪辑将保持未选定状态。现在,您还可以从选择中取消选择完全选择的剪辑,它们将不会随该部分一起移动。
  • 现在,在启用“波纹编辑”的情况下切割“编配器”部分会删除该孔,以使其与“删除”命令一致。
  • 单击发音(不带修饰符),或更改发音的类型或MIDI通道,现在会发送与该发音关联的所有触发MIDI事件。
  • 在大模式下,四个新按钮已添加到控制栏的“选择”模块中:“使用剪辑选择轨道信封”,“使用剪辑选择轨道清晰度”,“使用部分选择事件”和“使用时间尺选择部分”。
  • 现在,在同一轨道上的“ Take”车道之间移动剪辑时,将遵循“自动交叉淡化”设置。
  • 插入乐器轨道行为。从轨道上下文菜单中选择时,“插入乐器”命令现在将乐器插入当前轨道之前,而不是最后一个轨道之后。
  • “相位”和“交错”按钮现在可在“轨道”视图和“ Inspector”中找到“乐器”轨道。
  • 仅使用外部MIDI输入的选项。MIDI轨道现在具有新的“所有外部输入”输入选项,仅当项目中至少有一个带有MIDI输出的软合成器时才显示。所有外部输入表示不是软合成器输出的任何MIDI输入,例如硬件MIDI端口和虚拟控制器。
  • 现在,导出到标准MIDI文件将遵守选择。如果没有选择,则将导出整个项目。
  • 集成的LAME MP3编码器已更新至版本3.100。这包括错误修复和MP3编码的稳定性改进,还可以加快编码过程。此外,Cakewalk已更新为现在可以在导入MP3文件时处理填充样本。也就是说,导入的MP文件在文件的开头将不包含额外的数据。
  • 用于导入和导出各种音频格式的libsndfile库已更新至1.0.30版。这解决了处理BWF,Wave64,AIFF,FLAC和Ogg文件的许多问题。

最佳化

  • 在加载和编辑具有大量轨道和高参数计数插件的项目时,动态插件参数优化以及响应性和内存占用的改进。
  • 改进的ProChannel自动化处理。ProChannel旁路自动化现在独立于UI,并且缓存准确。ProChannel旁路还将在快速跳动和冻结操作期间通过自动化适当地启用/禁用。

Bug修复

  • 多次运行入职时崩溃。
  • 尝试在鼓替换器中加载新样本时崩溃。
  • 在运行VST扫描时挂起项目负载。
  • 重做作物然后移动清晰度崩溃。
  • 项目关闭时自动化崩溃。
  • 在“钢琴卷”中修改事件然后按播放后,很少发生崩溃。
  • 步进音序器片段间歇性地无法显示注释。
  • 步骤音序器节拍计数器无法重复Groove剪辑重复。
  • PRV不显示步进音序器循环的重复。
  • 2020.11更新后,插件中的曲目名称显示不正确。
  • 冻结时,传输无法通过“实时反弹”滚动。
  • 取消事件列表中的“种类”后,光标会意外移动。
  • 删除事件列表中的最后一个事件后,选择应该转到上一个事件。
  • 在项目加载时未为FX链创建可分配参数。
  • 项目编辑时间在文件统计中显示不一致。
  • 如果轨道上存在发音,则重命名片段对MIDI片段不起作用。
  • 静默安装的安装程序文本/进度栏被截断。
  • 使用轨迹管理器隐藏/显示总线后,总线窗格无法正确更新。
  • 单击“钢琴卷帘”视图中的音符或交换活动音轨将自动打开“清晰度映射”窗格。
  • 波纹编辑剪切未按预期移动编曲片段。
  • 2020.11中缺少节/编排标题。
  • 允许拖动/复制多个关节。
  • 鼠标光标在事件列表中的发音事件上移动/停留。
  • 缩放PitchWheel事件会给出错误的结果。
  • 除非实时完成,否则无法反弹或冻结ProChannel Enable自动化。
  • 选择信封时,选择会意外卡住。
  • 来自多条总线的总线信封在重复的剪辑/编排操作中未正确复制。
  • 切换音轨交错会导致插件自动化失去同步。
  • 无法将ProChannel自动化重新分配给轨道中的插件自动化。
  • 新创建的FX参数未确认自动化读/写。
  • 复制和粘贴FX自动化信封会创建孤立的信封,直到预先创建参数为止。
  • FX链输入/输出增益包络,用于控制FX链UI中的参数错误。
  • 更改合成器参数时未显示Synth Rack自动化。
  • 允许通过Synth Rack上下文菜单添加其他每输出乐器轨道。
  • 添加轨道不一致插入轨道行为。
  • 尝试关闭/删除实例时,具有多个带有高参数计数的插件实例的项目变得非常缓慢。
  • UseGlobalSnapForStaffView变量在打开较旧的项目后停止工作。
  • 导入的.wav文件在时间范围内具有点击次数。
  • 鼓谱图与轨迹模板意外保存。
  • VST Scan无法与该应用程序一起关闭。
  • 25毫秒以下时,“控制曲面刷新”值未按预期变化。
  • 自定义库选择在事件列表视图中不生效。
  • 插入/追加乐器无法将曲目放置在文件夹中。
资源下载此资源下载价格为1人民币,请先
QQ(微信):917715901
资源下载
下载价格:1 人民币
VIP优惠:免费
QQ(微信):917715901
0

评论0

请先

数字音频网专注分享最新最全的音频资源,帮你找,替你装,教你用!有问题请加Q/Q(微/信):917715901
没有账号? 注册忘记密码?

社交账号快速登录